K5NWZ • NORTHERN COLORADO
Emergency Communications Testing
Test your station. Connect with other operators. Find out what works before an emergency.
EMCOMM
Can we still reach each other when the grid, the cell towers and the internet are down? We test every layer, from mesh texting and simplex voice to HF, satellites and Winlink, and keep the results so we know what actually works across Loveland, Fort Collins, Greeley and beyond.
Why we’re testing
One night this November, around 1 a.m., we lost power for several hours. I couldn’t see a light anywhere nearby. I’ll admit I was concerned.
Naturally, I grabbed an HT and checked the local repeaters. They worked, but they might have been on backup power. But what if it had been bigger? What if power, internet and cell service were all down? Amateur radio might be our only way to communicate.
Hurricane Ike taught me that firsthand. In Houston, our area lost essentially everything for over a week. HF was our only communication in or out of a widespread area, aside from satellite uplinks few people had back then. My station became a lifeline for many around me.
I have emergency systems, but it had been too long since I tested them. I’d encourage every ham to do the same, so let’s test together: simplex, repeaters, Winlink, APRS, packet, backup power, message relays between communities, and direct MeshCore and Meshtastic channels. Who can reach whom without grid power or internet? Let’s find out before an emergency.
Public service is part of amateur radio’s purpose. When we got licensed, we joined that tradition. We owe it to our families, neighbors and communities to be ready. Even those who call our antennas ugly might someday be grateful they’re there!
73, K5NWZ
Register your station
Step 1: your name, email, call signs and town. We email you a private link. Step 2: open that link to add your station details. Keep the email: the same link lets you update your details any time, and only you have it.
Registered participants
Stations that have signed up and been approved. Locations show only to the 6-character grid square.
| Call | Name | Town | Grid | Modes |
|---|---|---|---|---|
| Loading... | ||||
Log a contact
Every time you hear a station, or someone tells you they heard you, log it here. Each report draws a line on the contact map. When both stations log each other, the line turns solid and counts as a confirmed path.
Contact map: who reached whom
Lines connect stations that logged a contact. A solid line is confirmed both ways. A dashed line means only one side reported it so far. Stations appear only after K5NWZ approves them, and only to the 6-character grid square (about 3 by 4 miles), never the exact address.
| Loading... |
Planning meetings on Discord video
Before the first tests we'll meet live on the K5NWZ Discord, with video and voice, to plan the nets, pick frequencies and divide up roles. Meeting times will be posted here and on Discord.
Suggest an idea
What should we test? What's missing from this page? Which frequency, repeater, time or mode should we try? Send it here. Every suggestion gets read, sorted and looked at before anything changes. Registered? Open the private link from your email first, and your idea is tied to your station.
Suggestions are private. Only K5NWZ sees them. Your contact info is never shown on the site.
How a test works
Each test answers one plain question: from where I am, with what I have, who can I reach? We pick a layer, try it, and write down what happened, including what failed.
Running a test session
Every session follows the same steps. The goal is a matrix of who hears whom, which the contact map draws from everyone's logs.
- Join the Discord video call. Tests are run from a video call on the K5NWZ Discord. Join about 10 minutes early with your radio and your private link open. Net control reads the plan and shares the contact map on screen.
- Move. Everyone tunes to the test frequency. Net control names the test (for example "2026-12-06 2m simplex"), and all on-air talk happens on the radio. The call is only for coordinating. If the call drops, keep going on the radio and net control takes over there.
- Roll call. Net control calls each station in turn by town. The called station transmits about 10 to 15 seconds: call sign, town, power and antenna. Everyone else writes down whether they heard it, the S-meter reading and readability (1 to 5).
- Reverse pass. Each station then reads off the stations it heard. That turns one-way reports into two-way confirmations.
- Relays. For any pair that can't connect, net control asks who hears both. That station relays one short message, and the relay goes in the log.
- Log. Enter your reports in Log a contact as you go. Lines appear on the shared map during the call. No internet? Use the paper log sheet below and type it in later, or read it to net control.
- Close. Net control closes the net and identifies. Results show on the map as people log.
Frequency plan
The working list for test sessions. HF frequencies and satellite passes are announced before each test.
| Layer | Where | What we test |
|---|---|---|
| Meshtastic open | 906.875 MHz US LongFast | Messages delivered, hop count, signal (SNR) between towns |
| MeshCore open | 910.525 MHz local channel | Repeater reach, delivery, path |
| GMRS | 462.5750 Ch 16 | Family-radio range town to town (GMRS needs its own FCC license) |
| 2 m simplex ham | 146.520 MHz FM calling | Radio-to-radio range, no repeater |
| 70 cm simplex ham | 446.000 MHz FM calling | Same, on UHF |
| Repeaters ham | Loveland/Fort Collins/Greeley machines (list) | Coverage, and whether the repeater stays up on backup power |
| HF ham | 80 / 60 / 40 m, announced per test | NVIS voice and digital across the region and statewide |
| Satellites ham | FM birds, ISS (pass times announced) | Short contacts using space, not the ground |
| Winlink ham | K5NWZ-10 gateway (packet), plus HF gateways | Email with no internet at the sender's end |
| Packet BBS ham | K5NWZ-1 (details) | Connect, read and post bulletins |
| APRS ham | 144.390 MHz | Position and short messages through digipeaters |
| AllStar / EchoLink ham | Node 28753 · EchoLink K5NWZ-L | Internet-linked voice, including over Starlink |
Test schedule
The first test dates and times are being set now. Each session will list its layers, frequencies and window (for example, "mesh and simplex, 7:00 to 8:00 PM"). Check back here, or watch for the announcement on the K5NWZ Discord.
Meshtastic and MeshCore
Small LoRa radios that pass text messages from node to node with no internet and no cell service. They're cheap, use very little power and run for days on a battery bank, which makes them the easiest grid-down layer for families.
What to test
- Direct reach: from your house, which nodes do you hear without any hop?
- Delivery: send a message to a named node across town. Did it arrive, and how many hops did it take?
- Grid-down: run the node and your phone on battery only, Wi-Fi off.
- Height matters: try once indoors, once from an upstairs window or roof, and compare.
906.875 Meshtastic US LongFast 910.525 MeshCore local
Simplex voice (VHF / UHF)
Simplex means radio to radio with no repeater in the middle. When repeaters lose power or get overloaded, simplex is what's left, so we want to know the real range between NoCo neighborhoods.
- Start on 146.520 (2 m) and 446.000 (70 cm). If it's busy, we move to a nearby simplex frequency announced on the air.
- Note your power (5 W handheld vs 50 W mobile), antenna (stock rubber duck, mag-mount, rooftop) and location.
- Try a relay: if A can't hear C, can B in between pass the message?
Repeaters
Local repeaters cover far more ground than simplex. The emergency questions are: who can hit which machine from where, and does it stay up when the power goes out?
- Check in on each local repeater during the test window and give a signal report.
- Note whether you're full quieting, noisy, or barely getting in.
- Repeater owners: tell us whether the site has battery or generator backup and roughly how long it lasts.
HF
HF reaches past the mountains and the horizon without any infrastructure. For regional emergency traffic we use NVIS (near-vertical incidence skywave): a low antenna sends the signal straight up and the ionosphere drops it back down over a few hundred miles, filling in the gap that VHF and long-distance HF both miss.
- 80 m for evening and night, 40 m for daytime, 60 m channels in between (USB, channelized rules apply).
- Test voice first, then a digital mode if both ends have it.
- Report your antenna and its height. For NVIS, a dipole only 10 to 20 feet up is often better than a tall one.
Frequencies are announced before each test so we stay clear of nets and band activity.
Satellites
Amateur satellites relay your signal from space during a pass of about 10 minutes. A dual-band handheld and a handheld Yagi (or even a good whip on a clear horizon) can make contacts. They're a backup path that doesn't depend on anything on the ground.
- FM satellites: pass times and frequencies for each test are posted ahead of time (apps like Heavens-Above or a pass predictor help you aim).
- ISS: APRS digipeater on 145.825 when it's active; try sending your position through it.
- Keep it short: callsign and grid square, then let others in.
Starlink and other uplinks
Satellite internet isn't ham radio, but it can bring the internet back to one spot when local lines and cell towers are down. That one spot can then feed everyone else through radio: AllStar and EchoLink voice links, Winlink over the internet, and mesh gateways.
- Power test: run the dish and router on battery or an inverter and time how long it lasts. Draw varies by model; measure yours with a watt meter rather than guessing.
- Bridge test: with Starlink as the only internet, connect AllStar node 28753 or EchoLink and confirm voice works end to end.
- Setup time: how long does it take from the box to a working connection? In a real outage, that matters.
Winlink
Winlink sends real email by radio. You write the message on your computer, your radio passes it to a gateway, and the gateway sends it on. If the gateway's internet is down too, messages can still move radio to radio.
- Packet (VHF): connect to the K5NWZ-10 gateway and send a test message.
- HF: try an HF gateway (VARA HF or ARDOP) to reach a station outside the area.
- Peer-to-peer: send directly to another station with no gateway at all.
- Use a standard ICS-213 form for one message so we practice the format agencies use.
Packet radio and the BBS
Packet is the old-school data network that still works with no internet. The K5NWZ BBS (K5NWZ-1) holds bulletins and messages you can read and post by radio.
- Connect to K5NWZ-1, list the bulletins and read one.
- Post a short test bulletin with your location and setup.
- Note whether you connected direct or through a node or digipeater.
APRS
APRS sends position reports and short messages on 144.390 through digipeaters. In an emergency it shows where teams and stations are.
- Beacon your position during the test window and check whether it shows up on the live map.
- Send an APRS message to another tester and confirm it was acknowledged.
- Try it with the internet off: did a digipeater carry it, or did it only work through an internet gateway?
AllStar and EchoLink
These link radios over the internet, so a handheld in Loveland can talk to someone across the country. They depend on internet somewhere, which is exactly why we test them over Starlink and backup links.
AllStar 28753 EchoLink K5NWZ-L
- Connect and check in during the window; note audio quality.
- Repeat with the hub on backup internet when we run a Starlink test.
Reporting your results
Every report, good or bad, fills in the map. Send these details:
- Call sign (or name for mesh)
- Location (town or grid square)
- Layer and frequency
- Who you heard or reached
- Signal report (e.g. 5/9, or SNR on mesh)
- Power and antenna
- Grid-down? (battery, no internet)
- What didn't work
Best: use Log a contact with your private link. Each report draws a line on the contact map. You can also report on the air at the end of the session, on the packet BBS, or on the K5NWZ Discord, and net control will log it for you.
New to this?
Start with the Preparedness guide to getting ready for outages, storms and fires in Northern Colorado, then come back and join a test.